All hardware needed to mount the seat is included.
It is always best to consult a contractor or handyman that can assess your specific situation.
It is easy to remove the seat from the wall when you no longer need it but you will be left with holes in the wall.
The seat is made from a durable plastic composite material that will not rust or deteriorate in a wet or humid environment. Always ask your handyman or contractor to check your specific situation if you are unsure.
We only have two colours at the moment.
We only have this one size available at present but are working on developing more sizes.
There is no locking mechanism to hold the seat in place as such but it has been designed to stay up neatly and out of the way when not in use.
Yes, this seat has TUV certification and has been tested to hold 350 Lbs when mounted according to the instructions included with the seat.
We have no padded version of this seat but you would be able to purchase a separate shower seat pad however we do not offer that currently.
This product is suitable for most tile types including ceramic but always check with your contractor or handyman about your specific tile choice if you are unsure.
This product is smaller than what the ADA recommends so it is not ADA compliant.
The seat has a slight angle up at the front edge. This is intentional to allow for some flex in the material when the seat is in use.
The wall bracket is 8.3 inches wide x 4.7 inches high and 2 inches deep.
The recommended drill to use is 10mm or just over 3/8 inch. (or 0.39 inches)
The seat is made from a durable plastic composite material that will not rust or deteriorate in a wet or humid environment.
The standard seat height is 17-18 inches from the floor. If this is intended for a person with limited mobility it might be necessary to mount higher or lower than that.
You can return the seat for a full refund within 30 days of purchase. We check all returns carefully and will happily refund when the product has been returned in unused condition and include all hardware, instructions, and parts.
The screw is 3 inches long and requires a 3-inch deep drill hole at 8/3 inch diameter
The screws are about 3 inches long. The hole will need to be just under 3 inches deep
Mounting this securely is of upmost importance. Please ensure all five screws are mounted in to masonry or timber. Improper installation can cause serious injury.
You will need to manually return the seat to an upright position.